40-110 Examination inspection

Overview

Assessment inspections can be used to configure individual, fine-grained assessment inspections. If required, additional restrictions on the IP address range or the use of the Safe Exam Browser can be configured. It is possible to create several different result displays.

Assessment inspections can be enabled independently of test visibility and access. It is useful if access to exams is to be granted under controlled conditions (e.g. in the lecturer's office) or only for a limited period of time (can be set individually for each participant).

Important steps

 

  1. In your course, click on Assessment management under Administration at the top left. The Assessment management window opens.
  2. If not already selected, click on Assessment inspections.
  3. Click on Add assessment inspection.
  4. Select the name of the assessment inspection, the maximum duration of inspection in minutes and which overview results should be shown.
  5. If desired, a restriction to IP addresses can be selected and the use of the Safe Exam Browser can be activated.

The desired course element can now be selected in the course view.

  1. Click on Assessment tool under Administration at the top left.
  2. Click on the Assessment inspections tab.
  3. Now click on Add members.
  4. Select the course element for which the inspection is to be created. Click on Next.
  5. Select the participants and click on Next.
  6. Choose the inspection period.
  7. You can optionally set an access code.
  8. If desired, an e-mail notification can be sent.
  9. Click on Finish.

The individual inspections can also be customised and changed using the 3-point menu:

  • Edit: The viewing period and the access code can be changed
  • Withdraw: The inspection is withdrawn.
  • Change duration of inspection: The inspection duration in minutes can be changed.
Nach oben scrollen