Universität Innsbruck

Kolloquium über neuere Arbeiten auf dem
Gebiete der Angewandten Mechanik und Festigkeitslehre

 

Sommersemester 2016

  • Prof. Teodor Atanackovic, University of Novi Sad, Faculty of Technical Sciences
    Viscoelasticity with fractional derivatives of real and complex oder
    28. Juni 2016
  • Dr. Athanasia Kazantzi, National Technical University of Athens
    Analytical seismic vulnerability assessment on a large scale. Where we stand and how far can we go?
    19. April 2016
  • Christos Giannelos, MSc, National Technical University of Athens
    Pathology and rehabilitation of stone bridges and the important role of maintenance: A case study of a central Greece historical bridge
    14. April 2016
  • Prof. Ricardo A. Medina, University of New Hampshire, Civil and Environmental Engineering
    Seismic Design, Analysis, and Installation of Nonstructural Components and Systems
    6. April 2016
  • Prof. Luis F. Ibarra, University of Utah, Department of Civil and Environmental Engineering
    Lack of Repeatability on the Seismic Response of Nuclear Dry Storage Canisters
    17. März 2016


Sommersemester 2015

  • Univ.Prof. Dipl.-Ing. Dr.techn. Dietmar Adam, Technische Universität Wien
    Bodendynamik - Theorie und Praxis
    2. Juni 2015

  • Assoc.Prof. Vincenzo Gattulli, University of L'Aquila
    What we have learned in the field of computational structural analysis for sustainable reconstruction and seismic risk mitigation after an earthquake
    19. Mai 2015

Wintersemester 2014/2015

Sommersemester 2014

  • Ass.Prof. Luis Ibarra, PhD, University of Utah
    Collapse capacity of reinforced concrete frames with high strength materials
    1. Juli 2014

  • Frédéric Bussières MSc. & Reinhard Steiner, GE Power & Water (GE Jenbacher) 
    Reciprocating engine development - design analysis
    5. Juni 2014

  • Ass.Prof. Dr. Katrin Beyer, EPFL Lausanne 
    Erdbebenverhalten von modernen Mauerwerksbauten
    3. Juni 2014

  • Assoc.Prof. Dr. Alessandro Gajo, University of Trento  
    Simulation of small-strain elastic stiffness anisotropy of sands
    20. Mai 2014

  • Ass.Prof. Dr. Daniele Zonta, University of Trento 
    Bayesian logic for intelligent civil infrastructure
    13. Mai 2014

  • Ao.Univ.Prof. Dr. Helmuth Pradlwarter & em.O.Univ.Prof. Dr. Kurt Ingerle, Universität Innsbruck
    Elastic stability
    1. April 2014


Sommersemester 2013

  • Dr. Roberto Nascimbene, Università di Pavia
    Seismic design and analysis of steel tanks
    26. Juni 2013

  • Dr. Roland Hinterhölzl, Technische Universität München
    Materialmodellierung und Prozesssimulation von Composites
    20. Juni 2013 

  • Dr. Michael Pertl, HILTI 
    Anwendungsgebiete der numerischen Simulation in der Entwicklung von Chemiedübelsystemen
    13. Juni 2013

  • Dr. Kornel Kerenyi, Turner-Fairbank Highway Research Center 
    US DOT/Federal Highway Administration’s Hydraulics Research Program
    04. Juni 2013

  • Dr. Burkhard Bornemann, University of Cambridge 
    Shear-flexible shells using non-manifold subdivision shape functions
    28. Mai 2013

  • Dr. Roland Wüchner, Technische Universität München 
    Isogeometric analysis and design of lightweight structures
    21. Mai 2013

  • Dr. Dimitrios Vamvatsikos, NTU Athen 
    Seismic hazard, corrosion, maintenance and the 100-year bridge concept
    25. April 2013

  • Dr. Thomas Wenk, ETH Zürich   
    Risikobasierte Erdbebenertüchtigung: Strategien und Beispiele aus der Schweiz
    18. April 2013

  • Dr. Bernhard Valentini, PLANSEE SE 
    Thermisch-mechanisch gekoppelte numerische Analysen im Hochtemperaturbereich bei PLANSEE SE
    11. April 2013


Sommersemester 2012

  • Dr. Matthias Hofmann, Alpine BeMo Tunelling 
    Tunneling, Berücksichtigung von nichtlinearem Betonverhalten im Tunnelbau
    29. Mai 2012

  • Katerina Konakli, Ph.D., Technical University of Denmark 
    Stochastic dynamic analysis of bridges subjected to spatially varying ground motions
    15. Mai 2012

  • Dipl.-Ing. Bertram Grass, Getzner Werkstoffe GmbH 
    Herausforderung Körperschall und sekundärer Luftschall - Lösung mittels Schwingungsisolation durch Polyurethan - Anwendungsbeispiele aus der Praxis
    8. Mai 2012

  • Assoc.-Prof. Dipl.-Ing. Dr. Michael Krommer, Johannes Kepler Universität Linz  
    Modellbasierter Entwurf piezoelektrischer Wandler zur Überwachung und
    Steuerung strukturmechanischer Systeme
    17. April 2012

  • Prof. Gustavo Ayala Milián, Universidad Nacional Autonóma de México
    Modal irregularity in continuos bridges and frames.
    Detection, effect on the simplified seismic performance evaluation and ways of solution
    29. März 2012

  • Flavia de Luca, Ph.D., Università degli Studi di Napoli Federico II
    Hazard analysis and ground motion: PSHA and record selection issues
    27. März 2012

  • Prof. Dr. Isaac Elishakoff, Florida Atlantic University  
    Critical overview of safety factors
    06. März 2012


Sommersemester 2011

  • Dr. Sukai Lu, Wienerberger AG 
    Seismic research results in clay block masonry
    21. Juni 2011

  • O.Univ.Prof. Dr. Dr.h.c. Hans Irschik, Johannes Kepler Universität Linz  
    Die Lagrange'schen Gleichungen in einer impulsbasierten Formulierung
    31. Mai 2011

  • Dipl.-Ing. Alfred Brunnsteiner, Präsident der Kammer der Architekten und Ingenieurkonsulenten für Tirol und Vorarlberg 
    Fallbeispiele zur Anwendung der Baustatik in der Praxis
    17. Mai 2011

  • Prof. Helmut Krawinkler, PhD, Stanford University
    Collapse prediction in earthquakes
    11. Mai 2011

  • Dipl.-Ing.(FH) Joseph Jordan, M.Sc., Technische Universität München 
    Effiziente Simulation von großen Mauerwerksstrukturen mit diskreten Rissmodellen
    12. April 2011

  • Dr. Peter Gamnitzer, Technische Universität München 
    Residuen-basierte Mehrskalenmodellierung von Turbulenz für die Simulation von Fluid-Struktur Interaktionen
    29. März 2011

  • Assoc.Prof. Antonella Pirrotta, Università di Palermo
    The De Saint Venant torsion problem: stress field evaluation through a novel line elementless method (LEM)
    15. März 2011


Sommersemester 2010

  • Dipl.-Ing. Matthias Aschaber, Universität Innsbruck 
    Feuchtetransport in porösen Medien
    17. Juni 2010

  • Dipl.-Ing. Bertram Peer, Liebherr-Nenzing 
    Aktuelle Anwendungen der Finite Elemente Methode bei Liebherr - Werk Nenzing
    10. Juni 2010

  • Prof. Dr. Hiroshi Tanaka, University of Ottawa 
    Wind stability of cable-supported bridges
    27. Mai 2010

  • Ass.Prof. Dr. Hermann Lehar, Universität Innsbruck 
    Connectorelemente in Statik und Dynamik - zwei Anwendungsbeispiele
    11. Mai 2010

  • Prof. Dr. Ronaldo I. Borja, Stanford University 
    Unsaturated slope failure
    4. Mai 2010

  • em.O.Univ.Prof. Dr. Dr.h.c. Franz Ziegler, Technische Universität Wien 
    Effektive Dämpfung von Bauwerksschwingungen durch neuartige Flüssigkeits-Gas-Kombitilger
    20. April 2010


Sommersemester 2009

  • Dr. Roman Kohler, Pyöry Energy GmbH 
    Numerische Modellierung und Design von Talsperren
    30. Juni 2009

  • Ao.Univ.Prof. Dr. Rudolf Heuer, Technische Universität Wien 
    Nichtlineare Einflüsse von passiven Pendeldämpfern in schlanken Baukonstruktionen
    18. Juni 2009

  • Dipl.-Ing. Thomas Furtmüller, Universität Innsbruck 
    Numerische Modellierung von Mauerwerk in Gründerzeitbauten
    9. Juni 2009

  • Univ.Prof. Dr. Christian Bucher, Technische Universität Wien 
    Zur Auslegung von Erdbebenisolatoren auf probabilistischer Grundlage
    7. Mai 2009

  • Dr. Johannes Jäger, Beton- und Monierbau GmbH 
    FE-Analysen als Bestandteil der Tunnelausführungsplanung - Fallbeispiele
    5. Mai 2009



zurück

Nach oben scrollen