Colloquium on Recent Advances in Applied Mechanics and Strenght of Materials

  • Prof. Teodor Atanackovic, University of Novi Sad, Faculty of Technical Sciences
    Viscoelasticity with fractional derivatives of real and complex oder
    June 28th, 2016

  • Dr. Athanasia Kazantzi, National Technical University of Athens
    Analytical seismic vulnerability assessment on a large scale. Where we stand and how far can we go?
    April 19th, 2016

  • Christos Giannelos, MSc, National Technical University of Athens
    Pathology and rehabilitation of stone bridges and the important role of maintenance: A case study of a central Greece historical bridge
    April 14th, 2016

  • Prof. Ricardo A. Medina, University of New Hampshire, Civil and Environmental Engineering
    Seismic Design, Analysis, and Installation of Nonstructural Components and Systems
    April 6th, 2016

  • Prof. Luis F. Ibarra, University of Utah, Department of Civil and Environmental Engineering
    Lack of Repeatability on the Seismic Response of Nuclear Dry Storage Canisters
    March 17th, 2016

  • Univ.Prof. Dipl.-Ing. Dr.techn. Dietmar Adam, Technical University of Vienna
    Soil Dynamics - Theory and Practice
    June 2nd, 2015

  • Assoc.Prof. Vincenzo Gattulli, University of L'Aquila
    What we have learned in the field of computational structural analysis for sustainable reconstruction and seismic risk mitigation after an earthquake
    May 19th, 2015

  • Ass.Prof. Luis Ibarra, PhD, University of Utah
    Collapse capacity of reinforced concrete frames with high strength materials
    July 1st, 2014

  • Frédéric Bussières MSc. & Reinhard Steiner, GE Power & Water (GE Jenbacher)
    Reciprocating engine development - design analysis
    June 5th, 2014

  • Ass.Prof. Dr. Katrin Beyer, EPFL Lausanne
    Seismic behavior of modern masonry structures
    June 3rd, 2014

  • Assoc.Prof. Dr. Alessandro Gajo, University of Trento  
    Simulation of small-strain elastic stiffness anisotropy of sands
    May 20th, 2014

  • Ass.Prof. Dr. Daniele Zonta, University of Trento 
    Bayesian logic for intelligent civil infrastructure
    May 13th, 2014

  • Ao.Univ.Prof. Dr. Helmuth Pradlwarter & em.O.Univ.Prof. Dr. Kurt Ingerle, Universität Innsbruck
    Elastic stability
    April 1st, 2014

  • Dr. Roberto Nascimbene, Università di Pavia
    Seismic design and analysis of steel tanks
    June 26th, 2013

  • Dr. Roland Hinterhölzl, Technical University of Munich
    Material modeling and process simulation of composites
    June 20th, 2013

  • Dr. Michael Pertl, HILTI 
    Applications of numerical simulation in the development of chemical anchor systems
    June 13th, 2013

  • Dr. Kornel Kerenyi, Turner-Fairbank Highway Research Center 
    US DOT/Federal Highway Administration’s Hydraulics Research Program
    June 4th, 2013

  • Dr. Burkhard Bornemann, University of Cambridge 
    Shear-flexible shells using non-manifold subdivision shape functions
    May 28th, 2013

  • Dr. Roland Wüchner, Technical University of Munich
    Isogeometric analysis and design of lightweight structures
    May 21st, 2013

  • Dr. Dimitrios Vamvatsikos, NTU Athen 
    Seismic hazard, corrosion, maintenance and the 100-year bridge concept
    April 25th, 2013

  • Dr. Thomas Wenk, ETH Zürich   
    Risikobasierte Erdbebenertüchtigung: Strategien und Beispiele aus der Schweiz
    April 18th, 2013

  • Dr. Bernhard Valentini, PLANSEE SE 
    Thermisch-mechanisch gekoppelte numerische Analysen im Hochtemperaturbereich bei PLANSEE SE
    April 11th, 2013

  • Dr. Matthias Hofmann, Alpine BeMo Tunelling 
    Tunneling, consideration of nonlinear concrete behavior in tunnel construction
    May 29th, 2012

  • Katerina Konakli, Ph.D., Technical University of Denmark 
    Stochastic dynamic analysis of bridges subjected to spatially varying ground motions
    May 15th, 2012

  • Dipl.-Ing. Bertram Grass, Getzner Werkstoffe GmbH 
    The challenge of structure-borne sound and secondary airborne sound - Solutions through vibration isolation using polyurethane - Practical application examples
    May 8th, 2012

  • Assoc.-Prof. Dipl.-Ing. Dr. Michael Krommer, Johannes Kepler UniversityLinz  
    Model-based design of piezoelectric transducers for monitoring and control of structural mechanical systems
    April 17th, 2012

  • Prof. Gustavo Ayala Milián, Universidad Nacional Autonóma de México
    Modal irregularity in continuos bridges and frames.
    Detection, effect on the simplified seismic performance evaluation and ways of solution
    March 29th, 2012

  • Flavia de Luca, Ph.D., Università degli Studi di Napoli Federico II
    Hazard analysis and ground motion: PSHA and record selection issues
    March 27th, 2012

  • Prof. Dr. Isaac Elishakoff, Florida Atlantic University  
    Critical overview of safety factors
    March 6th, 2012

  • Dr. Sukai Lu, Wienerberger AG 
    Seismic research results in clay block masonry
    June 21st, 2011

  • O.Univ.Prof. Dr. Dr.h.c. Hans Irschik, Johannes Kepler University Linz  
    The Lagrange's equations in an impulse-based formulation
    May 31st, 2011

  • Dipl.-Ing. Alfred Brunnsteiner, President of the Chamber of Architects and Engineering Consultants for Tyrol and Vorarlberg
    Case studies on the application of structural mechanics in practice
    May 17th, 2011

  • Prof. Helmut Krawinkler, PhD, Stanford University
    Collapse prediction in earthquakes
    May 11th, 2011

  • Dipl.-Ing.(FH) Joseph Jordan, M.Sc., Technical University of Munich  
    Efficient simulation of large masonry structures with discrete crack models
    April 12th, 2011

  • Dr. Peter Gamnitzer, Technical University of Munich 
    Residue-based multiscale modeling of turbulence for the simulation of fluid-structure interactions
    March 29th, 2011

  • Assoc.Prof. Antonella Pirrotta, Università di Palermo
    The De Saint Venant torsion problem: stress field evaluation through a novel line elementless method (LEM)
    March 15th, 2011

  • Dipl.-Ing. Matthias Aschaber, University of Innsbruck
    Moisture transport in porous media
    June 17th, 2010

  • Dipl.-Ing. Bertram Peer, Liebherr-Nenzing 
    Current applications of the Finite Element Method at Liebherr - Nenzing Works
    June 10th, 2010

  • Prof. Dr. Hiroshi Tanaka, University of Ottawa 
    Wind stability of cable-supported bridges
    May 27th, 2010

  • Ass.Prof. Dr. Hermann Lehar, University of Innsbruck 
    Connector elements in statics and dynamics - two application examples
    May 11th, 2010

  • Prof. Dr. Ronaldo I. Borja, Stanford University 
    Unsaturated slope failure
    May 4th, 2010

  • em.O.Univ.Prof. Dr. Dr.h.c. Franz Ziegler, Vienna University of Technology

    Effective damping of structural vibrations through novel liquid-gas combined dampers
    April 20th, 2010

  • Dr. Roman Kohler, Pyöry Energy GmbH 
    Numerical modeling and design of dams
    June 30th, 2009

  • Ao.Univ.Prof. Dr. Rudolf Heuer, Vienna University of Technology
    Nonlinear effects of passive pendulum dampers in slender structures
    June 18th, 2009

  • Dipl.-Ing. Thomas Furtmüller, University of Innsbruck
    Numerical modeling of masonry in historic buildings
    June 9th, 2009

  • Univ.Prof. Dr. Christian Bucher, Vienna University of Technology
    On the design of earthquake isolators based on probabilistic principles
    May 7th, 2009

  • Dr. Johannes Jäger, Beton- und Monierbau GmbH 
    Finite element analyses as part of tunnel execution planning - case studies
    May 5th, 2009

Nach oben scrollen